Handheld Sprayers

Home

Our Handheld Deicing Sprayers are aircraft-portable pressure sprayers appropriate for defrosting and light deicing operations.  They are commercial grade, polyurethane, controlled-pressure sprayers designed to spray hot  SAE Type I deicing fluid directly on your aircraft to remove frost, and light snow & ice. They are equipped with a 2 piece brass wand, flat-fan spray pattern, high-capacity, interchangeable nozzle tip that sprays 1.2 gpm of deicing fluid at 20 psi. They will also accept our optional 120-volt, 1100 to 1700 watt  electrical immersion heaters to quickly heat the fluid within the sprayer tank to 160

Following are the specifications on our Handheld Deicing Sprayers.

Model # -----> S31PS S32PS S33PS
Tank Capacity 1 Gallon 2 Gallons 3 Gallons
Tank/Pump Material Polyurethane Polyurethane Polyurethane
Flow Control Valve Brass Brass Brass
Spray Nozzle Tip Brass, Interchangeable Brass, Interchangeable Brass, Interchangeable
Spray Pattern 60 60 60
Wand (2 piece) Brass / Poly Brass / Poly  Brass / Poly
Hose Type Industrial Grade Industrial Grade Industrial Grade
Hose-to-tank Attachment Poly Compression Nut Poly Compression Nut Poly Compression Nut
Applicable Fluid Type SAE Type I Deicing SAE Type I Deicing SAE Type I Deicing
Maximum Fluid Temp 160 160 160
Typical Pump Pressure 10 to 30 PSI 10 to 30 PSI 10 to 30 PSI
Fluid Flow Rate 1.2 GPM @ 20 PSI 1.2 GPM @ 20 PSI 1.2 GPM @ 20 PSI
120 Volt Immersion Htr* IH-HS1; 1100 Watt*  IH-HS2; 1400 Watt* IH-HS3; 1700 Watt*
Lock-On Control? Yes Yes Yes
Pressure Release Valve? Yes Yes Yes
Funnel Top? Yes Yes Yes
Translucent? Yes Yes Yes
Dimensions 7" Dia. x 17" High 8.5" Dia. x 19.5 " High 9.5" Dia. x 21" High
Shipping Data UPS - 4# UPS - 5# UPS - 6#

                       *Optional; Do Not Use Immersion Heaters Other Than Those Shown Above In These Units  

 

 

Aircraft Deicing, Inc. Voice & Fax 866-268-3449

 sales@aircraftdeicinginc.com